Restoring Factory Defaults; Initializing From Settings - Buffalo TeraStation 3010 User Manual

Chapter 7 Advanced Features
3
Click the settings icon (
4
Click Browse and choose the config file (.nas_config) that was created with the migration source TeraStation. If
the config file was created with a password, enter it into the "Password" field.
5
Click Import.
6
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
7
The TeraStation will transfer the settings. When transferring settings is completed, click OK.
Notes:
• If the migration target TeraStation contains shared folders, users, and groups that share the same name as the
transferred settings, the existing settings will be overwritten.
• If the migration target TeraStations have already added some shared folders, users, and groups, the transferred
settings may exceed the maximum number of allowed shared folders, users, or groups. After migration finishes,
open Settings and verify that all settings were properly transferred.

Restoring Factory Defaults

Initializing from Settings

To initialize the TeraStation to its factory defaults from Settings, follow the procedure below.
1
From Settings, click Management.
2
Click the settings icon (
) to the right of "Configuration Management".
) to the right of "Restore/Erase".
183