Buffalo TeraStation 3010 User Manual page 197

Chapter 7 Advanced Features
5
Click the Time tab. Enable the NTP server and select the "Use default NTP server" checkbox. If you disable the
NTP function, click Use Local Date/Time to use your computer's time settings for the TeraStation.
By default, the TeraStation adjusts its clock automatically by using a default NTP server. This NTP server belongs
to Internet Multi Feed Inc. For more information, visit http://www.jst.mfeed.ad.jp.
To use a different NTP server, clear the "Use default NTP server" checkbox and enter a new NTP IP address or
its hostname, then click OK. If an NTP server is specified by name instead of IP address, make sure that a DNS
server is configured for the TeraStation.
Note: The internal clocks of the TeraStation and other devices on your network may run at slightly different
speeds. Over a long period of time, your network devices may show somewhat different times, which can
cause network problems. If clocks on your network vary by more than five minutes, unexpected behavior
may occur. For best results, keep all clocks on your network devices set to the same time by adjusting them
regularly, or use an NTP server to correct them all automatically.
6
Click the Language tab and select the language to be used.
Note: This tab changes the language used by the TeraStation for email notifications and other functions. To
change the language displayed in Settings, go to Settings and click Language from the menu bar. Choose your
desired language from the drop-down list.
196