Checking The Device Information From Dashboard - Buffalo TeraStation 3010 User Manual

Chapter 2 Configuration
Username
admin (default)
guest
Your username
• Click at the top-right of Settings and choose I'm here to have the TeraStation beep so it can be located easily.

Checking the Device Information from Dashboard

When opening the Settings interface, the Dashboard page will appear first. Dashboard will show the following
device information:
• Notices, such as information events and errors
• System information, such as hostname, firmware version, IP address, etc.
• Drive information, such as used space of internal drives, LVM volumes, iSCSI volumes, etc.
• CPU and system memory usage
• Network information, such as IP address, link speed, sent and received rates, etc.
Notes:
• If the number of files on the TeraStation increases, it will also increase the memory usage of the TeraStation. This
memory usage will decrease after a certain period of time passes. To reduce the memory usage immediately, try
the following operations:
◦ Restarting the TeraStation.
◦ Dismounting the USB drive.
• If there is not enough free space on the TeraStation, it may cause abnormal system behavior. Make sure that there
is always at least 1 GB or more of free space on the TeraStation.
Password Settings Available
password (default) All
blank System information (read-only)
If a user is assigned as an administrator, all settings are
Your password available. If assigned to another group, only system
information (read-only) is available.
23