Soft Keys (3); Rotary Encoder (4); Led Indicators (5-10) - Car-O-Liner CTR12000 Instruction Manual

Hide thumbs Also See for CTR12000:

Table of Contents

Car-O-Liner Group AB

1.1.2 Key-operated switch (2)

1.1.3 Soft keys (3)

The key lock switch allows access and selection of the operating modes

"AUTO"(Automatic operation) and "EDIT"(Edit//Program). The standard

mode for welding operation is "AUTO".

Service menus are only accessible while the key lock switch is in position

"EDIT". Pull out the key to prevent any manipulation by unauthorized per-

sons and keep it in a safe and accessible place.

The soft keys (membrane switches) are used for selecting the functions that

are indicated in the lower display bar – exactly above the corresponding soft

key. You can also use the rotary encoder to call these functions.

The rotary encoder can be used to select all the welding functions being

available. For this purpose, turn the rotary encoder until the desired function

is displayed in a gray field. Then press the switch for activating the corre-

sponding function or the selection menu (windows based).

Depending on the menu, the ESCAPE button (at the bottom right of the dis-

play) or the term "ESCAPE" appears. Select the ESCAPE button or the

ESCAPE function, if you do not wish to make a choice. All the settings

made before in the menu concerned are cancelled and the original values are

maintained.

(5)

YELLOW: Indicates that the welder is ready for operation

(6)

GREEN: Indicates that welding operation is being performed

(7)

RED: Indicates pending malfunction

CTR12000

41644, EN - rev. 2, 2012-09

Table of Contents

Show Quick Links

Table of Contents