Car-O-Liner CTR12000 Instruction Manual page 46

Car-O-Liner Group AB
Export of data
SpotQS logfile export
46
After entering the field Export, following window appears on the
In that menu you can export the individual welding programs with the modi-
fied parameters to an USB-stick. If you want to store your individual pro-
grams, choose UserDB.
To copy the SpotQS logfile, you have to insert the USB- Stick to the USB-
Drive of the machine. Choose SpotQS logfile export to transfer the QS- da-
ta to the USB- stick. Please also read the additional instruction manual: Ana-
lysing Spot- QS datasheets.
CTR12000
screen:
41644, EN - rev. 2, 2012-09