Machine Shut-Down - Car-O-Liner CTR12000 Instruction Manual

Car-O-Liner Group AB
MACHINE CONFIGURATION
ENTRY OF DATE/TIME
ERROR LOG
SYSTEM RESET

3.10 Machine shut-down

48
While in the AUTO or EDIT mode, parameters are displayed, but cannot be
modified.
Modifications are only allowed while in the expert mode. Only skilled users
who have been trained by Car-O-Liner should modify parameter fields.
Activate the field "DATE/TIME ENTRY" to set date and time. Move the
cursor onto the corresponding field or use the rotary encoder.
Activate the field "ERROR LOG" to display a possible fault. If no error
(malfunction) occurred, the mask "NO PENDING ERROR" appears. Oth-
erwise the corresponding fault is displayed on the screen.
Activate the field "SYSTEM RESET" to initiate system reset, i.e. the micro-
processors are re-started and the system is reset.
To shut down the machine, proceed in the following order:
1. Turn the mains switch to "0"
2. Loosen the air hose
3. Pull out the mains plug
CTR12000
41644, EN - rev. 2, 2012-09