Car-O-Liner CTR12000 Instruction Manual page 43

CTR12000
41644, EN - rev. 2, 2012-09
Remember that the option of saving is only available after having modified
one or more than one parameter in the menu "FURTHER ADJUST-
MENTS". Any modification is marked in the program selection field
with * * . You only have to modify and re-modify one parameter.
You may correct the welding power of a job at any time. The same goes for
the synergic and remaining parameters to be approached by the field "FUR-
THER ADJUSTMENTS" of the corresponding table.
The operations and displays when creating and saving jobs mostly corre-
spond to those performed and appearing when editing synergic characteris-
tics. Therefore no details are given at this place. See chapter 2.9.3 "Editing
synergy characteristics"
Car-O-Liner Group AB
43