Welding Menus; General - Car-O-Liner CTR12000 Instruction Manual

Car-O-Liner Group AB

2 Welding menus

2.1

General

Optional
program
VAS 6755.
Optional
program
BMW.
10
Basic screen
Programs, selection menus and parameters are selected from and displayed
on the basic screen. Display button (F5) is used to indicate and display pro-
grams, set points and actual values.
Display screen
The example above shows the following setting:
Welding task: CHECK-EL, Welding process:VISION, welding program:
BASIC, C-gun: C 80 arm, electrode CAP: 13 mm and welding operation:
AUTOMATIC.
The integrated welding programs that are stored in the physical welding da-
tabase have write protection. They can however be used to create personal-
ized welding program (see 3.7) , while being in the EDIT mode.
Additionally, you may create personalized welding programs to be saved as
follows:

Up to 99 synergic user programs: X01 - X99

Up to 99 JOBS: J01 - J99 (see 2.10.2)
You may modify or overwrite synergic user programs (X01 - X99) as often
as you like.
CTR12000
Choose with soft key F5.
41644, EN - rev. 2, 2012-09