Car-O-Liner CTR12000 Instruction Manual page 15

CTR12000
41644, EN - rev. 2, 2012-09
4. Choose the MODE „ AUTOMATIC"
In operation mode AUTOMATIC the EDIT- key should be switched to AU-
TO because otherwise the puls- sonar system which is integrated in the tong,
could not collect the total thickness of the material and the right parameters
that are needed are locked.
If the EDIT- key is on EDIT, an error message (red fault light) would also be
shown, which has to be quitted by the user.
Attention! Always use new or clean electrode caps when making
CHECK-EL!
Car-O-Liner Group AB
15