Usb- Drive - Car-O-Liner CTR12000 Instruction Manual

Car-O-Liner Group AB
3.8

USB- Drive

How to use the USB- Device
44
The USB device of your machine has various functions:

Backup of personalized welding programs.

Backup of the complete data stock of the machine.

Cloning of the machine data base.

Error analysis and remote maintenance in case of malfunction.

Data transfer to the PC for welding program visualization.

Installation of updates (Updates of the plug&weld data base for
welding parameters).

Installation of special welding software (new materials – new
processes).

Backup of QS data (only available for machines with QS system).
Normal welding operations generally do not require the USB drive. If you
wish to use the USB device nevertheless, proceed as follows:
Insert the USB- STICK
1. Open the USB- slot by removing the protection cap
2. Turn the cap against clockwise direction
3. Insert the USB- key
CTR12000
41644, EN - rev. 2, 2012-09