Dtone - Secondary Dial Tone; Emrgy - Dial Emergency; Flash - Flash Hook (#); Folto - Follow Me To - Avaya 2420 User Manual

2420 User Guide

DTone - Secondary Dial Tone

Return secondary dial tone to the user.
This function does not require any data entered when programmed. This function cannot be
programmed through the phone by the user.
Pressing DTone gives the user dial tone. They can then dial the telephone number they require.
This function is not available or supported on all system locales.
•
[User | Digital Telephony | Advanced | Dial | Secondary Dial Tone]

Emrgy - Dial Emergency

Dials a specified number regardless of any call barring applied to the user.
This function requires entry of a number to dial when programmed. That number is then shown next to
Emrgy. This function cannot be programmed through the phone by the user.
•
[User | Digital Telephony | Advanced | Dial | Dial Emergency]

Flash - Flash Hook (#)

Send a hook flash signal to the currently connected line.
This function does not require any data entered when programmed. This function cannot be
programmed through the phone by the user. This function can be programmed through the phone by the
user using an Admin 1 key.
•
[User | Digital Telephony | Advanced | Miscellaneous | Flash Hook]

FolTo - Follow Me To

Forwards calls from this extension to the specified target.
This function requires the target extension to be entered when programmed. The extension number is
then shown next to FolTo. This function cannot be programmed through the phone by the user.
Pressing FolTo sets the extension's Follow Me To number to the specified extension and switches
follow me use on. Whilst on, FolTo is shown with a symbol. Press
•
[User | Digital Telephony | Advanced | Follow Me | Follow Me To]

FwBNo - Forward On Busy Number

Sets the extensions forwarding number for use with forward on busy and forward on no answer.
This feature requires the target number to be entered when programmed. The number set is shown next
to FwBNo. This function cannot be programmed through the phone by the user.
Pressing FwBNo set the extension's forwarding number to that specified by the key pressed.
•
[User | Digital Telephony | Advanced | Forward | Forward On Busy Number]

FwBOn - Forward On Busy On

Switches the extension to forward on busy on.
This function does not required any data to be entered when programmed. This function cannot be
programmed through the phone by the user.
Pressing FwBOn toggles the extension's forward on busy state. When on, FwBOn is shown with a
symbol. When on, calls are forwarded to the extension's forward on busy number (see FwBNo - Forward
On Busy Number).
•
[User | Digital Telephony | Advanced | Forward | Forward On Busy On]
2420 User Guide
IP Office 3.0(DT)
FolTo again to switch off.
40DHB0002USEG Issue 3d (16th March 2005)
Page 40