Using Self Test; Selecting The Display Mode; Default Phone/Erase All Settings - Avaya 2420 User Manual

Using Self Test

Self test can be used to display information about the phone and to check operation of the lamps and
display. The information may be required by a telephone system maintainer.
1. Press Option. If
2. Press Self Test. The a screen of information appears.
3. Press and hold the
should come on.
4. Do one of the following:
• To return to the options menu, press
• To return to the call handling screen, press

Selecting the Display Mode

See Display Mode.

Default Phone/Erase All Settings

The Erase All option allows you to reset all personalized settings entered through the 2420's Option
menus (except contrast level). It also deletes all entries in the phones Call Log and Speed Dial lists.
1. Press Option. If
2. Press Erase All. A message is displayed indicating that the Speed Dial List and Call Log will
be erased, and that the User Options will be reset to the factory default values.
3. If you do not want to erase all, do one of the following:
• To return to the options menu without erasing, press
• To return to the call handling screen without erasing, press
4. 4. To continue with erasing, press
•
If you want to erase all settings, press
• To return to the options menu without erasing, press
• To return to the call handling screen without erasing, press
2420 User Guide
IP Office 3.0(DT)
Option is not shown press
Test key. The screen lines should all go black and all the phone lamps
Option is not shown press
Erase. You will be asked to confirm the action.
Selecting Personalized Options
to exit the current screen.
Done.
.
to exit the current screen.
Cancel.
Erase again.
Cancel.
40DHB0002USEG Issue 3d (16th March 2005)
.
.
Page 25