Rbak+ - Ringback When Free; Rbak- - Cancel Ringback When Free; Rbseq - Set Ringback Sequence - Avaya 2420 User Manual

2420 User Guide

RBak+ - Ringback When Free

Sets a callback when free on busy extensions and callback when next used on unanswered extensions.
This function does not require any data entered when programmed. This function cannot be
programmed through the phone by the user.
When an extension called does not answer or is busy, pressing
extension. Whilst the callback is set, AutCB is shown with a symbol. Pressing
the callback.
When the extension becomes free or is next used, Ring Back to and the number appears on the phone
that set the callback. Pressing
•
[User | Digital Telephony | Advanced | Miscellaneous | Ringback When Free]
See also:
• AutCB - Automatic Callback (!).

RBak- - Cancel Ringback When Free

Cancels any set ringback when free function.
This function does not require any data entered when programmed. This function cannot be
programmed through the phone by the user.
Pressing RBak- switches off any set ring back when free. If the ringback was set using a
key, that key will still appear with a symbol that can be cancelled by pressing the
•
[User | Digital Telephony | Advanced | Miscellaneous | Cancel Ringback When
Free]

RBSeq - Set Ringback Sequence

Sets the ringing pattern (sequence) used for voicemail and ringback calls. Not supported by the 2420.
This function requires the ringing pattern (0 to 9) to be entered when programmed. The number is shown
next to RBSeq. This function cannot be programmed through the phone by the user.
Pressing RBSeq changes the extension's ringback ringing pattern.
•
[User | Digital Telephony | Advanced | Set Ringback Seq]
See also:
• ICSeq - Set Inside Call Sequence.
• OCSeq - Set Outside Call Sequence.
2420 User Guide
IP Office 3.0(DT)
answers the ringback and starts a call to the callback target.
AutCB sets a callback on that
40DHB0002USEG Issue 3d (16th March 2005)
AutCB again cancels
AutCB
AutCB key again.
Page 52