HGOS+ - Set Hunt Group Out of Service
Put a specific hunt group out of service mode.
This function requires the hunt group number to be entered when programmed. The hunt group number
is then shown next to HGOS+. This function cannot be programmed through the phone by the user.
Pressing
HGOS+ puts the hunt group out of service. Group calls then go to its out of service fallback
group if set or, if not answered, to voicemail.
•
[User | Digital Telephony | Advanced | Set | Set Hunt Group Out Service]
HGOS- - Clear Hunt Group Out of Service
Returns a hunt group that has been manually put into out of service back to normal service.
This function requires that the hunt group number is entered when programmed. This function cannot be
programmed through the phone by the user.
The hunt group number is shown next HGOS-. Pressing
service if in night service.
•
[User | Digital Telephony | Advanced | Call | Clear Hunt Group Out Of Service]
Hold - Hold Call
Place the current call on hold at the exchange.
If no exchange slot number is specified when the function is programmed, exchange slot 0 is used. This
function cannot be programmed through the phone by the user.
Pressing
Hold is only supported if the exchange provides a Q.931 hold facility. It is not the same as
local hold provided by the telephone system.
•
[User | Digital Telephony | Advanced | Hold | Hold Call]
See also:
•
Rtriv - Retrieve Call.
HoldCW - Hold Call Waiting
Place the current call on hold and connects any call waiting.
This function does not required any data to be entered when programmed. This function cannot be
programmed through the phone by the user.
Pressing
HoldCW places the current call on hold and connects any call waiting without any ringing.
•
[User | Digital Telephony | Advanced | Hold | Hold CW]
IAuto - Automatic Intercom
Connects call to the extension without ringing.
This function requires entry of an extension number when programmed. The target extension must be
support handsfree operation. This function cannot be programmed through the phone by the user.
Press
IAuto connects the call without any ringing at the remote extension. If the target extension is
busy or not available, the call will follow any forwarding or diversion to voicemail set.
•
[User | Digital Telephony | Emulation | Automatic Intercom]
2420 User Guide
IP Office 3.0(DT)
HGOS- puts the group back into normal
40DHB0002USEG Issue 3d (16th March 2005)
Display Keys
Page 45