Product Handlers; Table 3: Product Handlers - Bosch D9412GV2 Program Entry Manual

D9412GV2/D7412GV2 | Program Entry Guide | 1.0
1.2

Product Handlers

Programming the 9000GV2 Series requires multiple product handlers. The availability of each handler is
indicated in Table 3. Refer to the specific control panel's release notes to determine the most current handler
versions.
Although the handlers shown in Table 3 can be used to program any of the new control panels, not all of the
functions operate. For example, the RADXUSR1 Handler programs users 000 through 124. Even though the
handler allows you to program users 100 through 124, the D7412GV2 does not allow the activation of these users.

Table 3: Product Handlers

Product Compatible Versions
Handler
GV2MAIN V1.00 and above
RADXUSR1 V1.06 and above
RADXUSR2 V1.05 and above
RADXPNTS V1.06 and above
RADXSKED V1.04 and above
GV2AUX V1.00 and above
RADXAXS V1.06 and above
Bosch Security Systems | 5/05 | F001U003636B
Introduction
Function
Covers Panel-Wide, Area, Keypad
Function List, User Interface, and Relay
programming modules.
Covers passcode and token
programming for users 000 through
124
(users 000 through 099 for the
D7412GV2).
Covers passcode and token
programming for Users 125 through
249.
Covers Point Index and Point
Assignment programming for all points.
Covers Open/Close Windows, User
Access Windows, Skeds, and Holiday
Index programming modules.
Covers SDI Automation, SDI RPS
Parameters, Enhanced Communication
Parameters, Route Group Attempts,
Miscellaneous, and Cross Point
Parameters.
Covers the programming parameters
for installed D9210B Door Controllers.
The program entry guide and program
record sheet for this handler come with
the D9210B Access Control Module.
EN | 6
D9412GV2 D7412GV2
N/A