Cf### Key Strokes; Custom Function; Cf### Text - Bosch D9412GV2 Program Entry Manual

D9412GV2/D7412GV2 | Program Entry Guide | 2.0

2.10.3 Custom Function

Use custom functions to simplify complex keystroke
sequences entered at the keypad. These items are
similar to speed dialing on a telephone. When the
custom function appears on the keypad, a user can
execute a request by pressing [ENTER]. You can have
up to sixteen custom functions and restrict their use by
area and authority level.
Custom Function ###
Each
characters of programmable text (
When the Custom Function is assigned to the menu
M## Function
(refer to Section 2.12 Function List on
page 70) the user can press [PREV] or [NEXT] to

CF### Text

scroll to
pressing [MENU] on the keypad.
The user needs the appropriate authority level enabled
L## C Function 128 to 143
for the
Interface on page 54, to use the custom function.
Consider the scope of the keypad used to access the
Custom Function. Each Custom Function is enabled in
the function menu by
8 M## CC Address 1 [through 8]
] (refer to
71). If the Custom Function is not assigned to a
specific keypad address, it does not appear in the
menu.
Custom Function
Default: 128
Selection:
128 to 143
Enter the Custom Function number you want to
program. You can program up to sixteen Custom
Functions, which are numbered 128 to 143.
CF### Text
Default: Refer to the program record sheet
Selection:
Sixteen alphanumeric characters.
See Section 2.10.2 Area Text
page 50 for valid character entries.
Determines the menu text displayed at the keypad for
the custom function item. Use this text to represent the
functions performed by this menu item.
Bosch Security Systems | 5/05 | F001U003636B
item has sixteen
CF### Text
. The user accesses the menu by
in Section 2.11 User
M## CC Address 1 [through
on page
GV2MAIN

CF### Key Strokes

Table 23: CF### Key Strokes
Default:
Selection:
Selection
0 to 9
).
A
B
C
D
E
C1
C2
C3
C4
C5
C6
C7
C8
The keystrokes simulate any sequence of keystrokes
the user can perform at a keypad. You can program up
to 32 keystrokes for each Custom Function.
DS5200 Data Entry
Use the [↓] key on the D5200 to move the cursor to
the first data entry line. To enter more than sixteen
keystrokes, you must fill the first line of the data entry
line before you move to the second line. If you make
entries on the second line, and the first line has less
than sixteen characters, the second line clears when
you press [ENTER].
The scope of the keypad where you access
the Function List can affect the way the
on
Custom Function operates.
Refer to the program record sheet
Up to 32 characters: 0 to 9, A, B, C, D, E
D1255
Faceplate
D1255 Key Label
0 to 9
[COMMAND]
[PREV]
(previous)
[ESC]
MENU
(escape)
[NEXT]
[ENT] {enter} YES
NA
NA
NA
NA
NA
NA
NA
NA
EN | 52
D1260 Key
0 to 9
[COMMAND∗]
NA
NA
NA
[#ENTER]
(softkey 1)
{softkey 2)
(softkey 3)
{softkey 4)
(softkey 5)
{softkey 6)
(softkey 7)
{softkey 8)