Table 9: Burglar Reports; Table 10: User Reports; Burglar Reports; User Reports - Bosch D9412GV2 Program Entry Manual

D9412GV2/D7412GV2 | Program Entry Guide | 2.0

Burglar Reports

Select Yes to send a report when the event occurs.

Table 9: Burglar Reports

Report Selections
R# Alarm
Yes, No
R# Burg
Yes, No
Restore
R# Duress Yes, No
R# Missing Yes, No
Alarm
R# Usr Code Yes, No
Tmpr
R# Trouble
Yes, No
Rpt
R# Missing Yes, No
Trbl
R# Non Fire
Yes, No
Suprv
R# Pt Bus Fail Yes, No
R# Pt Bus Yes, No
Rstl
R# Non Fire Yes, No
Cncl
R# Alarm
Yes, No
Restore
R# Sup Yes, No
Missing
R# Unverified
Yes, No
∗
Evt
∗
R# Unverified Evt
format. Additionally, this event does not produce a
corresponding Restoral event.
R# Unverified Evt is sent when a single
point programmed in Cross Point Group
faults into an alarm condition, then restores
before the Cross Point Time elapses.
R# Unverified Evt encompasses both Fire
and Non-fire points, but is not related to the
A# Verify Time used for smoke detectors.
The 9000GV2 Series control panels log a
Ground Fault Event as Trouble Point 256.
Bosch Security Systems | 5/05 | F001U003636B
Report Description
Burglar Alarm Event
Non-fire restoral from
trouble, missing, or
supervisory
Duress
Missing Alarm point
User code tamper
Trouble Event
Missing Trouble Event
Non-fire Supervision
Event
Point bus failure
Restoral of point bus
after failure
Canceled non-fire
alarm
Non-fire restoral from
alarm
Supervisory missing
Unverified Events for
Cross Points
is not reported when using BFSK
GV2MAIN
Restoral Reports are not sent if the
control panel resets after a point is
bypassed and then unbypassed. This is
true for both Fire and Non-fire points.

User Reports

Selecting Yes enables a report to be sent when the
event occurs.

Table 10: User Reports

Report Selections
R# Point Yes, No
Bypass
R# Forced
Yes, No
Point
R# Point Yes, No
Open
R# Point Yes, No
Close
R# Forced
Yes, No
Arm
R# Fail To Yes, No
Open
R# Fail To Yes, No
Close
R# Ext Clos
Yes, No
Tm
R# Opening Yes, No
Rpt
R# Forced Yes, No
Close
R# Closing Yes, No
Rpt
R# FC Perim Yes, No
Inst
R# FC Perim Yes, No
Delay
R# Perim Inst
Yes, No
Arm
R# Perim Yes, No
Delay Arm
R# Send User Yes, No
Text
EN | 16
Report Description
Point Bypass Event
Forced Point Event
Point Opening Event
Point Closing Event
Point Force Armed
Fail to Open Event
Fail to Close Event
Extend Close Time
Event
Opening Events
Point Forced Close
Event
Closing Events
Forced Close
Perimeter Instant
Armed Event
Forced Close
Perimeter Delay
Armed Event
Perimeter Instant
Armed Event
Perimeter Delay
Armed Event
User text