L3Harris narda PMM EP-600 User Manual page 95

Command
This setting command #00@c* temporarily puts the EP-600 in "Storing Mode" allowing
@c
thus storing a new address.
As this permission lasts only for 1 second, the command "I" should be issued closely.
This command has not a reply.
Example of command #00@c*
This setting command #00@Iaddr* sets the address used for communication protocol.
@I
addr
It is made of a 2 character string int range "00" to "99".
Neither spaces nor punctuation are allowed between "#@00" and addr .
This setting command is executed only if sent within 1 second since the command "c"
The reply is the address itself if it has been granted otherwise "ERR" if the EP-600 was
not in Storing Mode
Example of command #00@0I53* which sets the address to "53". Therefore, all following
commands starting with #53......*, in addition to #00....*, will be granted.
Table 6-3 Operative Commands
Description
Communication protocol 6-5