L3Harris narda PMM EP-600 User Manual page 69

For every working session (from starting to closing the software) the
following headline will be created in the txt file:
dd/mm/yyyy: working session date.
(EP600 model): between brackets is reported the EP600 model connected
Time: hour, minute, second of the measurement acquisition
X(unit) Y(unit) Z(unit): field value on x, y and z axis. If the XYZ
mode is not enable, each axis will be marked with a minus sign "-".
Between brackets is reported the unit
T (unit). Total field value; between brackets is reported the unit.
The recorded data can be viewed either as a graph or as a table. By
using Word or Excel application, click the Open file command and
select "Type of file": "all files"; then find the file to open starting from
the directory and follow the necessary path until the file is found.
The PLOT function allows to show the field measured during the test in an
5.5.7 Plot
intuitive graphical way; the plot represents the level versus time in seconds.
Once selected the button PLOT, the graph will appear:
WinEP600 and SetAddEP600 operating instructions 5-15