L3Harris narda PMM EP-600 User Manual page 62

5.5 Main window
contents
5-8 WinEP600 and SetAddEP600 operating instructions
This message appears when PMM EP-600/601/602/603/604 is not
connected or the communication is not established:
Select NO to quit the WinEP600.
Select YES to retry establishing the communication (check the PMM EP-
600/601/602/603/604 correct installation before).
Once connected the main window is displayed:
Commands description:
1. Title bar
2. Measurements and settings
3. Settings selection
4. Correction frequency setting in MHz
5. Reading rate in seconds (s)
6. Toggle between total field value or contemporary
readings
7. Button to store the field value (every time the software starts the button
is disabled).
8. Hold/run readings
9. Exit and quit the program
x - y – z axis