L3Harris narda PMM EP-600 User Manual page 81

Running SetAddEP600 utility
5.6
Connect the 8053-OC to the PC first serial port available or to the PC USB
port by USB-RS232 adapter. Then connect the PMM EP-
600/601/602/603/604 to the optical converter (for more details see chapter
"Operation").
In some PC models, the power delivered through the DB9 connector
may be not enough to supply the optical/serial converter 8053-OC. In
such cases, the external power supply adapter mod. 8053-OC-PS
must be connected between the PC and the optical/serial converter
8053-OC.
In case of using the USB-RS232 converter, wait for the "new hardware
installation" procedure. Drivers supplied with the converter can be used
as well.
Enter in Device Manager on the Control panel. In case of USB
connection, the assigned COM can be found in Ports (COM & LPT) –
Prolific USB to Serial Comm Port (COMx). Otherwise, if you are using
the PC serial port check on Porta di comunicazione (COMx).
COMx shows the COM port assigned.
The assigned COM port nr. must be between 1 and 9.
WinEP600 and SetAddEP600 operating instructions 5-27