5.5.8 HOLD / RUN
5.5.9 EXIT
5-20
WinEP600 and SetAddEP600 operating instructions
Press HOLD to freeze the readings.
Click on the button to toggle from HOLD to RUN
The button XYZ/TOT is active even when in HOLD.
If the program is exit when in HOLD mode, it will restart in RUN mode.
Press EXIT to end the program. The current settings are saved and will be
recalled at the next start.
Press YES to exit and turn the EP-600/601/602/603/604 off.
Press NO to not exit (EP-600/601/602/603/604 will remain on)