L3Harris narda PMM EP-600 User Manual page 68

5.5.6 Save Meas Active Measurements Log (√) to display the Save Meas button in the main
window.
When the software starts, the function Measurements Log is disabled
Every time the button Save Meas is selected, the field value is stored in the
file EP600_Measurements.txt file located on the installation folder; at the
first run the file is created automatically (the software must be run as
Administrator).
When the file is saved in TXT format and the table is opened, a huge
amount of data are available
If the field value measured is outside the nominal level range, the value are
displayed with Ovr, or ! or, * or Low . See the previous paragraph
for further information.
5-14 WinEP600 and SetAddEP600 operating instructions