L3Harris narda PMM EP-600 User Manual page 55

5.1 Foreword
5.2 PC minimum
requirements
1
Document EP60XEN-01122-3.16 – © NARDA 2020
5 – WinEP600 and SetAddEP600
Operating instructions
This section provides the information necessary to install and use the
WinEP600 software and SetAddEP600 utility with the PMM EP-
600/601/602/603/604 field probe.
The SetAddEP600 is a utility that integrates the PMM SB10 Switching
Control Box and the PMM EP-600/601/602/603/604.
Several PMM EP-600/601/602/603/604 can be connected to the PMM SB-
10 and each of them need to be set with a different address using the
SetAddEP600 utility.
To ensure the proper operations of the WinEP600 software, the minimum
hardware requirements of the Personal Computer are:
• Processor: Pentium
• 16 Mb RAM
• 10 Mb free space on hard disk;
• Operating system Windows™, XP/Vista/Win7/Win8/Win10
Software and Utility updates can be downloaded from the web page
www.narda-sts.it.
WinEP600 and SetAddEP600 operating instructions 5-1