L3Harris narda PMM EP-600 User Manual page 49

4.1 Foreword
1
Document EP60XEN-01122-3.16 – © NARDA 2020
4 – Battery charger EP600 CHARGER
The probe EP-600/601/602/603/604 internal circuitry is supplied by a
rechargeable Li-Mn internal battery to recharge by means of the battery
charger EP600 CHARGER connected to the mains by means of the
supplied adapter.
The EP600 CHARGER is intended for this application only; any other use
or application is strictly forbidden.
EP600 CHARGER is intended for operation on desk; its special design
allows for keeping the probe under charging in correct and safe position.
Inside the EP600 CHARGER a microprocessor controls and checks the
recharging operation.
The LED shows the charging status.
The adapter and power cable supplied with the EP600 CHARGER works
with mains voltages from 100 to 240 VAC, 50/60 Hz.
Fig. 4-1 AC adapter
Fig. 4-2 Power cable
EP600 CHARGER 4-1