L3Harris narda PMM EP-600 User Manual page 103

8.1 Foreword
8.2 Inspection
8.3 Ambient
8.4 Return for
service
8.5 Cleaning
Document EP60XEN-01122-3.16 – © NARDA 2020
8 - Accessories
This chapter explains how to use the accessories of PMM EP-
600/601/602/603/604.
The following general indications apply to all accessories.
Check the packing integrity.
If anything is found damaged or missed, immediately contact your
Dealer.
Check the accessories with reference to the packing list included in
the package.
Store the accessories in clean, dry environment free of dust and acid
vapours.
Follow requirements for temperature and humidity:
Operation:
• Temperature
• Humidity
Storage:
• Temperature
• Humidity
Every part of the accessories, included batteries, can only be replaced by
NARDA, when the instrument needs repair or is malfunctioning, please
contact the NARDA Support center.
When an accessory needs to be sent to NARDA for repairs please
complete the questionnaire enclosed with this Operating Manual making
sure you fill in all the details relative to the service requested.
In order to minimize repair time, please describe the nature of the failure. If
the failure occurs only under certain conditions, please provide details on
how we may recreate the same condition in order to identify the fault.
If possible, please reuse the original packaging, making sure the accessory
is wrapped in heavy paper or plastic.
Alternatively, use a strong box filled with shockproof material, place enough
material all around the equipment so that the unit is stable and firmly
blocked inside the box.
Whilst packing, pay special care in protecting the unit's front panel.
Seal the box firmly before shipment.
Mark the box: FRAGILE HANDLE WITH CARE.
To clean the equipment use only dust-free, non-abrasive dry cloths.
To avoid damage never use any kind of solvent, acid, or similar to
clean the instrument.
-10° to +40° C
< 90% RH
-20° to + 70° C
< 95% RH
Accessories 8-1