Usb Connection Of Ep-600/601/602/603 With Fo-Ep600/10 Extension - L3Harris narda PMM EP-600 User Manual

- at one extremity the extension optic cable FO-EP600/10 is terminated with
a shaped connector. Respect the connection sense when connecting the
same into the shaped receptacle OPTIC LINK of the 8053-OC adapter.
In case of 40m Fiber Optic Optional Cable FO-EP600/40, differently from
what available for the 10m and 20m fiber, the "white plug" is not provided
on one side of the fiber for 8053-OC Adapter matching.
In fact for FO-EP600/40 the fiber optic cable is made of special "glass",
which is not allowing a proper mechanical matching with same "white plug"
used for the plastic made 10m and 20m fiber.
The FO-EP600/40 the fiber optic cable is provided instead with same
"BLUE-GREY" connectors on both sides
These connectors can be easily plugged into the 8053-OC Adapter directly,
just taking care about proper orientation, as for the following picture, until a
"click" is felt while gently pushing connectors inside each corresponding
hole:
Do not connect/disconnect the optic fibre by applying force to the
fiber optic cable directly: this may damage the optical connection.
Always hold the connectors with your fingers firmly to
connect/disconnect the optic fibre.
Presence of dust, dirt or particles of any nature on the optical
connecting surfaces must be carefully prevented.
Fig. 2-2 USB connection of EP-600/601/602/603 with FO-EP600/10 extension
2-6 Operation