L3Harris narda PMM EP-600 User Manual page 76

F Settling time
Very fast
1
2 Very fast
Fast
3
4 Average
Average
5
Average
6
7 Slow
Slow
8
5-22 WinEP600 and SetAddEP600 operating instructions
Normally a fast field measurement is required for faster response and
better stability when the field probe controls as feedback for a preset field
value the radiated power of a system composed by antenna and RF
generator.
However, as faster the measurements as higher the noise is, with
consequent reduction of sensitivity.
Slower measurements increase sensitivity but increase the response time
and the power consumption.
The PMM EP-600/601/602/603/604 features eight different filters to help
finding the most suitable combination of the a.m. parameters for each
specific application:
Power consumption
Very low
Very low
Low
Average
Average
Average
High
Very high
In normal operation setting the filters F4 - F5 may offer a good
compromise in terms of power consumption, sensitivity, settling time
and rejection @ 50Hz.
Sensitivity Rejection
@ 50Hz
Low -----
Average Low
Good ------
High Good
High High
High Very high
Very high good
Very high High
Rejection
@ 60Hz
low
------
-------
Very high
High
Good
Good
High