Error Massage - ADTEK CS2-MC Manual

■ OPERATIONS:
EFORE POWER ON, PLEASE CHECK THE SPECIFICATION
AND CONNECTION AGAIN
SELF-DIAGNOSIS AND ERROR CODE:
/
/
Signal
/
Operating Key:
■
*Please access to the Programming Level to check and set the parameters when users start to run the meter

Operating Key: 4 keys for

The meter has designed operation similar as PC's
"confirm setting", and press

In Programming Level, the screen will return to Measuring Page after do not press any key over 2 minutes, or press
for 1 second.
(1) In any page, press
(= )
Enter/Fun key
(2) From the function index to access setting status
(= )
(1) In measuring page, press
Shift key
(2) In function index, press
(3) In function group index, press
(1) In function index, press
(= )
Up key
(1) In Function Index Page, press
(= )
Down key
■ FRONT PANEL
Relay status
R L 1 R L 2 R L 3 R L 4
Indication
Up screen
for Totalizer
ENT/FN
/BR
Operation Key
BR batch zero butto

LED:
: 10

0.28"(7.2mmH) LED
red
: 6
digital present values

LED

Error Massage

：EEPROM occurs error
：Didn't execute the calibrate of output
：Output Signal calibrated error
Enter(Function) /
key means "escape(
Function Index
to access the level or
function index
access user level.
back upper level.
to go back measuring page
previous function index
next Function Index Page.
Control Input
status
CI11 CI2 CI3 COM
Comm. status
Down screen
for PV or Batch
m
/TR
Engineer Unit
TRTotal zero button
digital present values
: 0.28"(7.2mmH)green
Shift(Escape) /
and
Enter
)" or "shift".
Esc
for 1 second to
for 1 second to go
for 1 second
to go back to
will go to the
RL 1 RL2 RL3 RL4
RL1
display when Relay 1 has been energized
RL2
display when Relay 1 has been energized
RL3
display when Relay 1 has been energized
RL4
display when Relay 1 has been energized
RS 485 Communication: 1 square orange LED;
COM
will flash express the meter is receive or send data,
:
and flash quickly means the data transient quicker.
EC1 EC2 EC3
EC1 display when E.C.I. 1 has been closed(dry
EC2 display when E.C.I. 1 has been closed(dry
EC3 display when E.C.I. 1 has been closed(dry
4 / 19
DISPLAY
(Please send back to
manufactory for repaired)
(Please process Calibrating
Output Signal)
(Please check Calibrating
Output Signal)
Up key / Down key
. In any page, press
Setting Status
(3) Setting Confirmed, save to EEProm and go
to next function index
(4) In setting status, press
setting position.
(5) In setting status, press
abort setting and go back this function
index.
(2) In setting status for function, press
select function
(3) During number Setting, press
the digit up
(2) In setting status for function, press
select function
(3) During number Setting, press
the digit down.
Relay Energized: 4 square red LED
E.C.I.: 3 square green LED；
contact)；
contact)；
contact)；
CS2-MC Manual 2014/9/9
REMARK
key means "enter" or
to Shift the
for 1 second to
to
can roll
to
can roll
；
；
；
；