ADTEK CS2-MC Manual page 10

PPr:Pulse Per Rotation
The input pulse number must be
divided by this value, the count
before doing arithmetic
Cnt.SF:Counter Set Factor
After the count value is multiplied
by this value is the display value
dP(Decimal Point):
Decimal Point of Totalizer & Batch
ttL.Md:Totalizer Mode of up
screen
Up screen display selection
(Totalizer & Batch)
oFSEt(Offset): default start point
setting
P.CodE(Pass Code): Please
remind and write down the new
pass code so that get into
programming level.
F.LoCk(Function Lock): There
are 4 levels selectable for lock.
Setting Range: 1~9999
Shift
Setting Range:
0.10000~9.99999
Shift
Setting Range:
0 / 0.0 / 0.00 / 0.000 / 0.0000
/ 0.00000
&
Setting Range:
noMAL(Normal): Totalizer
bt.Cnt(Batch Count): Batch
&
Setting Range:0~999999
Shift
Setting Range:: 0000~9999
Shift
Setting Range:
nonE(None): no lock all
USEr(User Level): User level
lock. User can get into
user level for checking
but setting.
EnG(Engineer Level):
Programming level lock.
User can get into
programming level for
checking but setting
ALL(All Level): User can get
into all level for checking
but setting
&
10 / 19
Up Down
Up Down
Up&Down Enter
Up&Down Enter
Up Down
Up Down
Up&Down Enter
CS2-MC Manual 2014/9/9