Wiring Of An Intrinsically Safe Braking Resistor; Using A Non-Intrinsically Safe Braking Resistor; Figure 19: Wiring Of An Intrinsically Safe Braking Resistor - KEB COMBIVERT S6 Instructions For Use Manual

cONNecTION Of THe POWer UNIT

4.2.6.2 Wiring of an intrinsically safe braking resistor

Figure 19: Wiring of an intrinsically safe braking resistor
NOTICE

4.2.6.3 Using a non-intrinsically safe braking resistor

R
PA
Only "intrinsically safe" braking resistors are permissible for this oper-
ation, since these resistors interrupt themselves at fault such as safety
fuse without fire risk. The delivered intrinsically safe
braking resistors by KEB are described in the following link.
Technical data and design for intrinsically safe braking re-
sistors.
www.keb.de/fileadmin/media/Manuals/dr/ma_dr_safe-braking-resis-
tors-20106652_en.pdf
Technical data and design for non-intrinsically safe braking
resistors.
www.keb.de/fileadmin/media/Manuals/dr/ma_dr_braking-resis-
tors-20116737_en.pdf
X1B
R
- -
++
U
V
W
49