Certification; Ce Marking; Functional Safety; Annex To The Declaration Of Conformity - KEB COMBIVERT S6 Instructions For Use Manual

ce MArKING

5 Certification

5.1 ce Marking
CE marked drive converters have been developed and manufactured to comply with the
regulations of the Low-Voltage Directive and EMC directive.The harmonized standards
of the series

5.2 functional safety

Drive converters with functional safety are marked with the FS logo on the nameplate.
These units are designed and manufactured in accordance with the Machine Directive.
The harmonized standard of the series

5.3 Annex to the declaration of conformity

Annex to the EC declaration of conformity for systems with functional safety:
Product designation:
Hereby we declare that the safety component specified above complies with all relevant
regulations of the machine directive.
The safety component specified above meets the requirements of the following guide-
lines and standards:
•
•
•
•
58
EN 61800-5-1and
Further information can be found in the download area of
search term „Declaration of
Drive converter - series
Dimension
Voltage class
Machine directive
EMC directive
Low-Voltage Directive
Hazardous substances
EN 61800-3 were used.
conformity".
EN 61800-5-2 is used.
www.keb.de under the
xxS6(A / K)xx-xxxx
07 - 14
400 Vac
2006/42/EC
2014/30/EU
2014/35/EU
2011/65/EU