Check The Oil Level In The Hydraulic Tank; Wheels; Skid Guard - Husqvarna FR 2216 MA 4x4 Workshop Manual

DELIVERY AND DEALER SERVICE

Check the oil level in the hydraulic tank

Remove the transmission cover. Loosen both
screws (one on each side) and lift off the
transmission cover.
Leave the cover removed for now.
Check that there is oil in the hydraulic tank.
Fill if necessary with engine oil SAE 10W/40
(class SF-CC).
IMPORTANT INFORMATION
Check and top up with oil after test
running. If there are air pockets in the
transmission or hydraulic system, the oil
level will drop.

Wheels

Fit the wheels (certain markets).
The tyre pressure should be 60 kPa / 0.6 bar /
9 PSI on all wheels.
Highest permitted pressure is 100 kPa /
1.0 bar / 14 PSI.
IMPORTANT INFORMATION
Different air pressure in the front tyres
will result in the blades mowing the
grass at different heights.

Skid guard

In those cases where the front and rear skid
guards are delivered with the machine, it is
the dealer's responsibility to fit them.
20
English-
Transmission cover
Hydraulic tank
Wheels
Rear skid guard