3.5. Transformer and motor cable terminals
3.5.1. Transformer cable terminals
For information on the location of the terminals, see Fig. 3-7.
3.5.2. Motor cable terminals
The motor terminals are in the back of the COU compartment. To access them,
open the swing frame of the control unit.
Besides of the busbars for motor cable terminations, this unit also includes the
charging transformer for the DC link, the EMC filter and the EAF filter.
The layout of the motor terminal section depends on the following:
–
Frame size (single or double busbars)
–
Cable entry (from top or from bottom of the cabinet)
For information on the dimensions and the busbar arrangement, see "Appendix C -
Mechanical drawings".
1
A
Figure 3-16 Motor terminal section of frame size 1 and 2: top entry (A) and bottom
entry (B)
PRODUCT
ACS5000W
2
DOCUMENT KIND
User manual
POWER ELECTRONICS AND CABINET FEATURES
B
DOCUMENT ID.
3BHS799208 E01
REV.
LANG.
PAGE
F
en
48/178