Operational Commands; Setting The Direction Of Rotation - ABB ACS5000 User Manual

– To enter the remote control mode, press the LOC-REM key.
• A blank space indicates full remote control from a higher-level control
system.
R
• The letter
locally).
1 R 600.0 rpm 0
StateINU ReadyRun
MOTOR SP 0.00 rpm
POWER 0.0 kW
NOTE – To prevent accidental switching from remote control to local control, see
"9.2.5.2 Disabling / enabling local lock function" on page 150.

9.3. Operational commands

For instructions on how to start and stop the drive system from the CDP control
panel, see "8.7 Starting the drive" on page 123 and "8.8 Stopping the drive"
on page 127.

9.3.1. Setting the direction of rotation

Setting the direction of rotation from the CDP control panel is possible in:
– Local control mode (L)
– Remote control mode (R)
The arrow on the display indicates the direction of rotation:
– When the motor is running, the arrow indicates the actual direction.
– When the motor is not running, the arrow indicates the preselected direction.
PRODUCT
ACS5000W
indicates partial remote control (some commands are enabled
1 L ->
StateINU
MOTOR SP
POWER
DOCUMENT KIND
User manual
600.0 rpm 0
ReadyRun
0.00 rpm
0.0 kW
DOCUMENT ID.
3BHS799208 E01
CDP CONTROL PANEL
REV. LANG. PAGE
F en 152/178