Transportation, Storage And Disposal; Safety; Transport Conditions; Unpacking And Inspection - ABB ACS5000 User Manual

4. Transportation, storage and disposal

4.1. Safety

The drive must only be handled by personnel who are skilled and
experienced in unpacking and transporting heavy equipment

4.2. Transport conditions

The transport conditions for the drive are based on IEC 60721-3-2.
– Classification: 2K12 / 2B1 / 2C2 / 2S5 / 2M4

4.3. Unpacking and inspection

1. Remove all packaging material carefully.
2. Check the drive and accompanying equipment for damages.
3. Compare the complete delivery with the purchase order and the packing list.
4. If parts are missing or damaged, immediately inform the shipping company
and the ABB service organization.
It is recommended to photograph the damages and send the photographs to
ABB.

4.4. Identifying drive units

A delivery can consist of transport units for several drives. To identify the
transport units and assign them to a particular drive, see the following
accompanying papers for information:
– Packing list, attached to the packaging of each transport unit
– Packing label on the back wall of each drive unit (PCU, COU, WCU). The packing
label is only visible after the packaging has been removed.
PRODUCT
ACS5000W
DOCUMENT KIND
User manual
TRANSPORTATION, STORAGE AND DISPOSAL
DOCUMENT ID.
3BHS799208 E01
REV. LANG. PAGE
F en 59/178