Installing Ip42 Roof-Mounted Cooling Units; Table 5-2 Installation Material Per Ip42 Unit - ABB ACS5000 User Manual

5.10.2. Installing IP42 roof-mounted cooling units

One by one, install the IP42 roof-mounted cooling units on top of the PCU
compartments that have the designated openings.

Table 5-2 Installation material per IP42 unit

Item
Self-tapping Torx screws
Washers with sealing
Cable binders
1. Align the unit with the opening (1) in the cabinet roof.
2. Slowly lower the cooling unit onto the cabinet roof.
IMPORTANT! Make sure that the screw holes fit.
3. Screw the cooling unit to the cabinet roof.
4. To get to the cable inside the cabinet, remove the back wall if necessary to
reach them from the back.
PRODUCT
ACS5000W
Quantity
18
18
1
DOCUMENT KIND
User manual
Details
M6x16
6.8x1 (4.8x2.8)
DOCUMENT ID.
3BHS799208 E01
MECHANICAL INSTALLATION
REV. LANG. PAGE
F en 74/178