ABB ACS5000 User Manual page 125

When no alarms and faults are present and the drive is ready, the CDP control
panel displays ReadyOn.
1 L -> 0.0 rpm
StateINU ReadyOn
MOTOR SP 0.00 rpm
POWER 0.0 kW
4. Press the SUPPLY ON push button on the control compartment door to charge
the DC link. The push button flashes during charging.
The status line of the CDP control panel alternates between Charging and
AuxiliaryOn.
1 L ->
StateINU
MOTOR SP
POWER
After charging has been finished, the following takes place:
• The main circuit breaker closes automatically.
• The SUPPLY ON push button lights up permanently.
1 L -> 0.0 rpm
StateINU ReadyRun
MOTOR SP 0.00 rpm
POWER 0.0 kW
5. Enter the reference value.
For more information, see "9.3.2 Entering a reference value" on page 153.
1 L -> [600.0 rpm] 0
StateINU ReadyRun
MOTOR SP 0.00 rpm
POWER 0.0 kW
PRODUCT
ACS5000W
0.0 rpm
Charging
0.00 rpm
0.0 kW
0
DOCUMENT KIND
User manual
Alternating display message:
– Charging
– AuxiliaryOn
DOCUMENT ID.
3BHS799208 E01
OPERATION
REV. LANG. PAGE
F en 125/178