Stopping The Drive - ABB ACS5000 User Manual

8.8. Stopping the drive

– To stop the motor, press the STOP key.
The motor stops according to the preset stop function. While the motor stops,
the status line of the display shows ReadyRef and the run status message
blinks.
1 L -> 600.0 rpm I
StateINU ReadyRef
MOTOR SP 300.00 rpm
POWER 20.0 kW
As long as the stop sequence is in progress, you can always restart the drive by
pressing the START key.
Just before the motor comes to a standstill, the status line shortly displays
Stopping.
1 L -> 600.0 rpm 0
StateINU Stopping
MOTOR SP 0.00 rpm
POWER 0.0 kW
When the motor has reached zero speed, the status line displays ReadyRun.
1 L -> 600.0 rpm 0
StateINU ReadyRun
MOTOR SP 0.00 rpm
POWER 0.0 kW
As long as the MCB has not been opened, you can restart the motor at any time.
PRODUCT
ACS5000W
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS799208 E01
OPERATION
REV. LANG. PAGE
F en 127/178