Target Groups And Required Qualification; Handling; Mechanical Installation; Electrical Installation - ABB ACS5000 User Manual

Table 1-8 Terms and abbreviations (continued)
Term/Abbreviation
Transformer
terminal section
WCU

1.5. Target groups and required qualification

The drive presented in this manual is part of an industrial environment where
voltages are present that contain a potential hazard of electric shock and / or burn.
For this reason, only personnel who have a thorough knowledge of the drive and
the industrial environment and have obtained the required qualification should
handle, install, operate, or maintain the drive.
The manual addresses personnel who are responsible for unpacking,
transportation, installation, operation and maintenance of the drive. The
personnel must carry out the below listed tasks in a manner that does not cause
physical harm or danger, and ensures the safe and reliable functioning of the drive.
IMPORTANT! Commissioning of the drive must only be performed by qualified and
certified ABB personnel

1.5.1. Handling

Personnel must be skilled and experienced in unpacking and transporting heavy
equipment.

1.5.2. Mechanical installation

The personnel must be qualified to prepare the installation site according to the
site and equipment requirements and to perform the installation accordingly.

1.5.3. Electrical installation

Personnel must have a sound knowledge of the relevant electrical codes and
specifications covering low and medium voltage equipment, be experienced with
electrical wiring principles and know the electrical symbols typically used in wiring
diagrams.

1.5.4. Operation

The personnel include all persons who operate the drive from the local operator
panel of the drive. The personnel must know the functions of the operator panel,
be adequately trained for the drive, and know the driven process. Special
knowledge of frequency converter technology is not required.
PRODUCT
ACS5000W
Definition
This is the customer terminal for connecting transformer cables. It
is located in the back of the PCU compartment.
The water cooling unit (WCU) dissipates heat losses of the power
electronics.
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS799208 E01
ABOUT THIS MANUAL
REV. LANG. PAGE
F en 19/178