Storage And Handling Of Spare Parts; Warranty Information - ABB ACS5000 User Manual

4.7. Storage and handling of spare parts

NOTICE
Static electricity can damage printed circuit boards.
– Apply static-sensitive precautions when handling spare parts.

4.7.1. Warranty information

IMPORTANT! Check the spare parts immediately after receipt for damages. Report
any damage to the shipping company and the ABB service organization.
Observe the following to maintain spare parts in good condition and to keep the
warranty valid during the warranty period:
– Keep spare parts in their original packaging.
– Store printed circuit boards in antistatic bags or boxes.
– Storage temperature range: -5 °C – + 55 °C
– Storage place requirements:
• Free of vibration and shock.
• Protected against dust, sand, vermin and insects.
• Free of corrosive gases, salt or other impurities that could damage
electronic equipment.
• Dry, no condensation: relative air humidity: 5 – 95%
If in doubt whether the maximum allowed humidity is exceeded, protect
spare parts by an external heater.
– Do not touch a component without wearing a wrist grounding strap.
– Put the component on a grounded working surface protected against
electrostatic discharges.
– Hold the component only at the edge.
PRODUCT
ACS5000W
Risk of component damage.
DOCUMENT KIND
User manual
TRANSPORTATION, STORAGE AND DISPOSAL
DOCUMENT ID.
3BHS799208 E01
REV. LANG. PAGE
F en 65/178