5.15. Connecting raw water pipes
Connect the incoming and outgoing raw water pipes to the flanges of the water
cooling unit.
Installation material such as counter flanges, bolts, nuts and seals are supplied.
For dimensions of the raw water entry and the flanges, see "Appendix C -
Mechanical drawings".
5.16. Fixing the drive to the floor
The base frame provides holes for fixing the drive to the floor. Floor fixings are not
supplied. Bolts and nuts of size M16 are recommended.
PRODUCT
ACS5000W
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS799208 E01
MECHANICAL INSTALLATION
REV.
LANG.
PAGE
F
en
84/178