Appendix A: Shipment - Molecular Devices SkanStacker 300 User Manual

An all-inclusive automatic microplate washer

Table of Contents

Appendix A: Shipment

Prior to transporting the SkanStacker, carry out the following steps.

Step 1 Decontaminate the system following Weekly Maintenance proce-

dure. If radioactive materials are used, use appropriate decontami-

nate solution for each material.

Step 2

Perform Empty Head procedure to empty dispense head of all fluid.

Step 3

Clean exterior surface of instrument with alcohol followed by water.

Step 4

Remove the magazines.

Step 5

Secure the wash head and plate carriage using foam and tape. Install

transport bracket on rail (see page 5).

Step 6

Complete and sign the decontamination form.

Step 7

Ship in the original packaging material and cardboard box.

SkanStacker User Manual

!! IMPORTANT:

Original packaging

must be used. If unavailable, obtain

packaging from Molecular Devices.

A-1

Table of Contents

Do you have a question about the SkanStacker 300 and is the answer not in the manual?