Setup Function; Edit Program - Molecular Devices SkanStacker 300 User Manual

Software Configuration

Setup Function

The
[Setup]
When in Setup mode, the
If an error occurs, press the
The
[Enter]
The arrow keys
or to scroll through values. To continue to scroll through values, keep
the arrow key depressed.
When pressing the
options:
Edit Program A wash program can be edited or created using this selection.
Edit Options Instrument parameters can be viewed and sensor enabled/
disabled.

Edit Program

Step 1 Press
[Setup]
minate.
Step 2 Select Edit Program.
Use
Press
[Enter]
Step 3 Select the program to be edited or select an open space to create a
new wash program.
Use the
Press
[Enter]
15
key is used to enter and leave the
[Setup]
key is used to select an item in a list or a value.
are used to place the cursor on an item in a list
key, the Setup Main menu will display two
[Setup]
to enter the Setup window. The Setup LED will illu-
arrow keys to move cursor to selection.
.
arrow keys to move cursor to selection.
.
!! IMPORTANT:
Exit/Save must be selected after
program setting completed.
Setup
key is used to move backward.
key to go back a step.
[Setup]
To save changes,
SkanStacker 300 User Guide
window.