Molecular Devices SkanStacker 300 User Manual page 24

Program
Configuration
Set Dispense
Position
Wash Program
1-16
SkanStacker 300 User Guide
Description
The position of the dispense probes (shorter probes) is
adjusted using this setting.
Place microplate in left magazine and press
. Carriage will move microplate under
[Enter]
probes. Use
height (see Figure 8).
Total adjustable distance is 6 mm.
Up to 16 wash steps can be added. There are seven wash
step selections available for each step: Rinse time, Disp
volume, Soak / Pause, Wash volume, Wash time, Aspi-
rate, and End Wash. See Table 1 on page 20 for descrip-
tions.
Software Configuration
arrow keys to set at correct
18