Designated Use; Target Group; Service - Festo CPVSC1-VI Manual

Contents and general instructions

Designated use

Target group

Service

Festo P.BE−CPVSC−EN en 0301a
The CPV−SC valve terminals described in this documentation
have been designed exclusively for controlling pneumatic
actuators.
They may only be used in conjunction with devices and com
ponents recommended or approved of by Festo as follows:
as specified in industrial applications
without any modifications by the user Only the conver
sions or modifications described in the documentation
supplied with the product are permitted
in faultless technical condition.
The maximum values specified for pressures, temperatures,
electrical data, torques etc. must be observed.
Please comply with national and local safety laws and
regulations.
This manual is intended exclusively for technicians trained in
control and automation technology, who have experience in
fitting, installing, commissioning, servicing and converting
pneumatic components.
Please consult your local Festo repair service if you have any
technical problems.
V