Festo CPVSC1-VI Manual page 38

3. Installation
Removing
3−8
Fig. 3/1: Fitting the tubing
Proceed as follows:
Warning
If the pneumatic tubing is under pressure when connec
tions are loosened, it may perform sudden unexpected
movements, thereby causing injury to human beings.
Switch off the compressed air supply before disconnect
·
ing the pneumatic tubing on the CPV−SC valve terminal.
1. Loosen the locking screw or press the locking ring of the
screw connector.
2. Pull out the tubing.
3. Replace non−required screw connectors with blanking
plugs 3.
Fig. 3/2: Disconnecting the tubing
2
1
3
Festo P.BE−CPVSC−EN en 0301a