Festo CPVSC1-VI Manual page 49

3. Installation
3.4 Address assignment of the valves
1
1
Address of valve solenoid coil/valve
location number
2
A double−solenoid valve occupies two
valve locations
Fig. 3/6: Example: Address assignment of a CPV−SC valve terminal with 12 valve
locations (front view)
Festo P.BE−CPVSC−EN en 0301a
Detailed information on fitting the electrical connections can
be found in the leaflet supplied with the product.
CPV−SC valve terminal with MP connection
The addresses must be assigned in ascending order with
out gaps.
Counting begins on the valve terminal from left to right
(see diagram).
A valve location always occupies one address:
0 1 2 3
2 3 2
4 5 7
6
3
3
A single−solenoid valve occupies one
valve location
10
9 11
8
3−19