Overview Of Components - Festo CPVSC1-VI Manual

1. Summary of components
1.3

Overview of components

Identification code
I.C. Pneumatic components
Valve plates
M 5/2−way valve, single−solenoid,
J 5/2−way valve, double−solenoid This valve consists of two valve plates and therefore
occupies two valve locations. The control valve" is marked with j 12, the work valve"
with Ident. code J.
N 3/2−way valves, single−solenoid, basic position open
K 3/2−way valves, single−solenoid, basic position closed
D 2/2−way valves, single−solenoid, basic position closed
Separator plate with additional pressure supply
T Compressed air channel (1) blocked
S Compressed air channel (1) and exhaust air channel (3/5) blocked
Additional pressure supply
V Additional supply of compressed air (1) and additional exhaust removal (3/5)
Blanking plate
L Plate without valve function for placing in an unused valve location
Tab. 1/2: Identification code
1−6
With the identification code (I.C.) you can ascertain the equip
ment fitted on your CPV−SC valve terminal. The code is
printed on the front below the manual overrides.
Further information on the valve plates can be found in
Appendix A.
Festo P.BE−CPVSC−EN en 0301a