Table of Contents
Advertisement
3.1 Overview
3.1.1 PCMCIA card standard compatibility
The embeded PCMCIA driver supports all ATA flash card devices with a size from 2Mb up to 75Mb and
is compatible with the PC card format (type II).
The write-protected signal available on these cards is not tested and not used because of a lack of
standard rules.
3.1.2 PCMCIA card handling
If your recorder is equipped with the PCMCIA option board, you can use a memory card to store the
recorder information.
For this, proceed as indicated in the following figure to introduce the memory card:
Note: The recorder will automatically detect the card presence.
The recorder indicates the writing status by lighting a led located under the display
(see Figure 3-2).
This led must be off when removing the memory card (this can be done with the remove or stop
function), if not, some data may be lost.
To remove the memory card press the button located above it.
3. OPERATION
Figure 3-1: Card loading in the 180mm or 250mm recorder
PCMCIA Option Manual
13
Hide quick links:
Advertisement
Table of Contents
